Rubber Base Coat
Couldn't load pickup availability
Looking to add some extra strength to your gel mani's? Then look no further, our Rubber Base Coat is a supercharged base that will not only increase the strength and longevity of your gel polish but also add the flexibility needed to help prevent breakages and protect the natural nail. Our clear rubber base can also be used to encapsulate chromes and embellishments.
- UV and LED curable
- Super strong base
- Build short to medium length extensions
- Soak off
- Long lasting wear
- Silky smooth application
- Vegan & Cruelty Free
One 18ml bottle achieves up to 140 sets.
FOR PROFESSIONAL USE ONLY.
Join the TWENTY Insta fam...Tag @twenty.pro.official to share your #nailfies with us!
This product contains HEMA, do not use on those with a HEMA or acrylate sensitivity.
Always wear non permeable, nitrile gloves when handling any UV gel product.
Only apply to healthy nails.
Avoid all contact with skin. If contact with skin occurs, remove immediately.
Do not cure nails with product on the skin.
Use a 36W UV/LED lamp with a minimum of 365 + 405 nanometers to cure. Cure each coat for 60 seconds. If hands are removed from the lamp during curing, always make up lost seconds with another round of curing. It is not possible to over cure this product.
Remove gloves using a 'no touch method' i.e. do not pull from the fingertips where you could touch transferred product, pull down from the wrist, turning the glove inside out and dispose of in general waste. Always use a fresh pair of gloves for each client.
Always wash both yours and client's hands after application of final top coat and before use of cuticle oil.
Our products are for use by qualified nail professionals only.
Ingredients:
Di-Hema Trimethylhexyl
Dicarbamate, Hydroxypropyl Methacrylate, HEMA, Isobornyl Methacrylate, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethybenzoyl Phenylphosphinate
The TWENTY Professional Smart Lamp has been meticulously designed to fully cure all products in the collection.
Cure each coat for 60 seconds. If hands are removed from the lamp during curing, always make up lost seconds with another round of curing. It is not possible to over cure this product.
PAT test your lamp annually and check daily that all bulbs are in good working order and free from cured gel residue.
Our products have also been tested with the SunUV range of lamps.
FOR REBALANCING (INFILL) BUILDER OR HARD GEL
1. Prep nail fully and lightly etch using either a 180 grit buffer or a 240 grit file or equivalent sanding bands.
2. Apply a thin coat of product using the 'scrubbing method'. Using back and forth motions to work the product into the micro grooves you have created during the etching process. Cure using a UV/LED lamp with 365 + 405 nanometers and 36W for 60 seconds or 99 seconds in low heat mode if client is prone to heat spikes.
3. Apply a very small bead of product to the centre of the nail where your client's natural apex would appear. 'Bounce' up towards the cuticle area and drag down the centre of the nail. Allow the product to self level, using a liner brush to gently manipulate the product into place and ensuring the product covers the entire nail. You may like to turn the hand upside down to aid the creation of the natural apex. Please note that this is not a full structural overlay, use only a very small bead of product.
4. Cure for 99 seconds in low heat mode.
5. Apply your gel colour, builder or hard gel overlay in your usual manner and cure accordingly.
Rubber Base works as a protective base when rebalancing (infilling) builder or hard gel overlays. Remove the builder or hard gel until you reach the Rubber Base layer, assess the nail health and repeat the steps above to rebalance.
FOR USE AS A STANDARD BASE
1. Prep nail fully and lightly etch using either a 180 grit buffer or a 240 grit file or equivalent sanding bands.
2. Apply a thin coat of product using the 'scrubbing method'. Using back and forth motions to work the product into the micro grooves you have created during the etching process. Cure using a UV/LED lamp with 365 + 405 nanometers and 36W for 60 seconds or 99 seconds in low heat mode if client is prone to heat spikes.
Access our free online Mastery Courses to get the most from our products in your account area.
- Finish with TWENTY Glass No-Wipe Top Coat
- Use a cuticle oil daily to prevent lifting and chipping
- Avoid swimmng and hot tubs for 48 hours after application
- Use gloves when cleaning with harsh chemicals to protect nails
- Do not pick at polish, this may cause damage to the natural nail.
- Do not use nails as tools, this can cause damage to the natural nail.
We begin preparing your goods as soon as your order is received. All orders are shipped within 24 hours of your order being placed (Monday - Friday).
Delivery Prices:
UK Mainland:
1 - 3 business days - £5.99
Northern Ireland / Republic of Ireland:
1 - 3 business days - £7.99
UK Mainland / Northern Ireland / Republic of Ireland orders over £150:
1 - 3 business days - Free
Europe:
2 - 11 business days - £12.99
Europe orders over £200:
2 - 11 business days - Free
USA:
1 - 3 business days - $7.99
USA orders over $150:
1 - 3 business days - Free
Rest of the World:
3 - 17 business days - £24.99
Rest of the World orders over £200:
3-17 business days - Free
*Please note, local customs charges may apply.